Submersible brushless water pump

Submersible brushless water pump with a filter.
Brushless, permanent magnetic rotor.
Enameled wire coil and circuit board are sealed by epoxy resin.
The coil has pure copper enameled wire, lower temperature rise, and longer life span.
Low consumption and low noise (less than 35db).
Four rubber suckers on the bottom, can adsorb on the smooth surface and reduce noise and vibration.
Temperature range from 0°C up to 100°C.
Submersible installation and entirely waterproof.
 
 
Specifications
Material PC, ABS
Color black
Waterproof class IP68
Noise less than 35dBSize
Length 4.4cm and 1.7″
Width 3.5cm and 1.3″
Height 2.6cm and 1″
 
Inlet diameter 8mm and 0.31″
Outlet diameter 8.5mm and 0.33″
 
 
Type 1
Voltage 12V DC
Current 4160mA
Power 5W
Maximum water flow 280 liters per hour
Maximum lift 300cm and 118.1″
Maximum water temperature 60°C
The cable length is about 100cm and 39.3″
 
Type 2
Voltage 5V DC
Current 480mA
Power 2.4W
Maximum water flow 250 liters per hour
Maximum lift 200cm and 78.7″
Maximum water temperature 100°C
The cable length is about 150cm and 59″
 
Type 3
Voltage 5V DC
Current 960mA
Power 4.8W
Maximum water flow 300 liters per hour
Maximum lift 300cm and 118.1″
Maximum water temperature 100°C
The cable length is about 150cm and 59″
 
Type 4
Voltage 12V DC
Current 500mA
Power 6W
Maximum water flow 300 liters per hour
Maximum lift 300cm and 118.1″
Maximum water temperature 100°C
The cable length is about 150cm and 59″
 
Type 5
Voltage 12V DC
Current 830mA
Power 10W
Maximum water flow 400 liters per hour
Maximum lift 400cm and 157.4″
Maximum water temperature 60°C
The cable length is about 150cm and 59″
 
 
Notes
The real product colors may be slightly different from what you see in the images.
The product dimensions may be slightly different from what is written in the product specifications.